电机驱动微装配在双光子制备微结构中的应用

对微结构的制作、微装配系统进行了研究. 采用飞秒激光双光子聚合微加工技术制作有底座、精细的三维立体“拱形”微结构, 其高250μm、长300μm、厚50μm. 将此微结构与实验室自主搭建的二维微装配平台相结合, 利用自主编程的人机交互界面驱动步进电机, 远程操控微装配设备; 将荧光闪烁陶瓷粉末装配到微结构中, 对装配后的微结构进行荧光光谱表征发现, 纯荧光粉末和微结构中的荧光粉末的发射光谱在测量误差范围内基本一致, 表明荧光粉末的光学性质未发生改变. 利用该装置可以将各类微纳米级材料和微结构进行装配, 形成含有不同材料的微结构系统.     

CCSD(T) study on the structures and chemical bonds of AnO molecules (An = Bk–Lr)

The molecular geometries and dissociation energies of AnO (An = Bk–Lr) molecules were first obtained at thecoupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] level of theory. Four hybrid functionals,B3LYP, M06-2X, TPSSh, and PBE0, were also employed in the calculations for the sake of comparison. In comparison ofthe CCSD(T) results, B3LYP, TPSSh, and PBE0 functionals can obtain more appropriate results than M06-2X and MP2.The analyses on molecular orbitals show that the 7s, 6d, and 5f atomic orbitals of actinide (An) atoms participate in thebonding of An–O bonds. The partial covalent nature between An and O atoms is revealed by QTAIM analyses.     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

吉林大学物理化学学科:笃学致远 润物无声

伴随建系而生的吉林大学物理化学学科是吉大化学学科的重要组成部分,在70年的发展中为整个化学学科的发展建设做出了重要贡献。吉大物化人一直坚持理论与实践并重的教育思想,培养了大批优秀人才。回顾了吉大物理化学学科的历史沿革,展现了吉林大学化学学院物理化学在课程和教材建设、科学研究和人才培养等方面所取得的成绩。在吉大化学70周年华诞之际,谨以此文向为吉大物化学科建设做出贡献的前辈致敬。     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.     

Novel low-dielectric constant and soluble polyimides from diamines containing fluorene and pyridine unit

Polyimides (PI's) with low-dielectric constant and excellent organic solubility have broad application prospects in the electronic field. Herein, this study designed a series of novel, low dielectric, organic soluble PI films by creatively introducing fluorene and pyridine ring into diamine monomers. Because of the noncoplanar structure of fluorenyl and the polarization of pyridine ring, PI films achieved a low-dielectric constant (2.22–3.09 at 10 MHz) and excellent organic solubility. Even in some organic solvents with low-boiling points, these PI films still exhibited outstanding solubility. In addition, all the films possessed high-tensile strength (≈120 MPa) and excellent optical transparency (>70%, 450 nm). It was worth noting that the glass transition temperature of films was all above 280°C and 5% weight loss temperature (T_5%) was at 486–553°C. In general, the novel high-performance low-dielectric PI films are expected to be used in the field of microelectronics.     

Laplacian Perfect State Transfer in Extended Neighborhood Coronas

Acta Mathematica Sinica, English Series - In this paper, we give some sufficient conditions for extended neighborhood coronas to have Laplacian perfect state transfer. We also give some conditions...